View Our Profile

  1. Mohammed Ali
  2. P.hD
  3. Mechanical engineering
  4. K L University
  5. mdabid_786@yahoo.co.in
  6. Download Resume
Journal Information:
Title: EAPJMSE
Editor Type: Editorial Board
Bio
Work Background
  • Ratified as Associate Professor by JNTU staff selection Committee in the year 2010 .

2.Workeing  an  Professor in Mechanical Engineering  from K   L University,Vijayawada  from July 20154 to till date.

2.Worked as an  Associate Professor in Mechanical Engineering  from K   L University,Vijayawada  from February 2014 to june2015.

  1. Workied as an Professor & Head of the Department in Mechanical Engineering from Anurag Engineering College, Kodad from November 2012 to january2014.

3.Worked as an an Assoc.Professor & Head of the Department in Mechanical Engineering & Incharge Hod for Civil Engineering from Anurag Engineering College, Kodad from October 2010to November 2012.

  1. Worked as an Assoc. Professor in Mechanical Engineering from Anurag Engineering College, Kodad from July 2009toOctober2010.

45 Worked as Assistant Professor& Head of The Department in Aeronautical Engineering from NIMRA Institute of Science & Technology, Vijayawada from October 2008 to june2009.

6.. Worked as Assistant Professor& Head of The Department in Mechanical Engineering from NIMRA College of Engineering & Technology, Vijayawada from July 2001 to October 2008.

  1. Worked as a Lecturer in Mechanical Engineering in J.B. Institute of Technology, Hyderabad from October 2000 to April 2001
Research Contributions

1.Presented paper on “Expert systems approach for selection of material handling equipment in FMS National Conference on Emerging Trends in Concurrent Engineering January 15-16, 2005 Organized by Department of Mechanical Engg. NIT ROURKELA, ORISSA.

2.Paper presented on Fatigue Analysis of Weldments. National Conference, RTDMT 2005, March 17-18th 2005 Kumarguru College of Technology, COIMBATORE, Tamilnadu State, India.

3.Paper presented on Fracture Analysis of Weldment National Conference, CAME – 2005, 21st December, 2005 JNTU College of Engineering, Anantapur, Andhra Pradesh State, India.

4.Paper presented on Free Vibrations Analysis of    Thin FRP Laminated Composite Plates using FEM. International Conference, ICADM– 2007, 9th to 11, August, 2007, Sethu Institute Of Technology,Pulloor,Kariapatti, Tamil Nadu, India.

5.Paper presented on Micro Mechanical Analysis of  FRP Composite Lamina for Thermal Loading. International Conference, ICRTME– 2007, 4th to 6, October-2007, Ujjain Engineering College, Ujjain, India.

6.Paper presented on Finite Element Simulation of Thick   FRP Laminated Composite Beam With Simply Supported End Conditions. National Conference, AMMP– 2007, 5th to 6, October, 2007, University B.D.T. Engineering College, Davengere, Karnataka, India.

7.Paper presented on Micro Mechanical Analysis of   FRP Composite Lamina for Thermal Loading.National Conference, RAIME– 2008, 20th to 21st, March- 2008, National Engineering College, Kovilpatti, Tamil Nadu, India.

8.Paper Presented on Wood Polymer Composites: A Review, National Conference, GTMTS-2010, March-2010, Sethu Institute Of Technology,Pulloor,Kariapatti, Tamil Nadu, India.

JOURNALS:

Published papers in the international journals – 7

[1] DETERMINATION OF IMPACT STRENGTH OF POP AND SAW DUST COMPOSITE LAMINATE "authorized by Mohammed Abid Ali has been published   for publication in International journal of scientific computing “Serials publications, New Delhi".

[2] DETERMINATION OF THERMAL CONDUCTIVITY OF PLASTER OF PARIS "authorized by Mohammed Abid Ali has been published for publication in INTERNATION E-JOURNAL OF MATHEMATICS AND ENGINEEING journal” 52(2010)528-531.

[3] Md. Abid Ali, Dr. K.N.S. Suman, Dr. V.V.S. Kesava Rao, “Mechanical and Thermal Properties of Indian Cork Wood PolyAcrlonitrile Composites”, Journal of Automotive Mechanical &Aerospace Engineering Research ISSN:2229-9270, March, 2011.

[4] Mohammed Abid Ali and V.V.S. Kesava Rao, “Compressive Strength of Neem, Mango and Cork Wood Poly Acrylonitrile Composites”, International journal of Engineering Research and Technology, ISSN:0974-3154, Vol.4, No.4, pp.391-399, 2011

[5] Mohammed Abid Ali, Dr. K. N.S Suman and V.V.S. Kesava Rao, “Thermal behaviour of Cork, Mango and Neem Wood Polyacrlonitrile Composites Thermogravimetric Analysis in Inert Atmosphere”, acceptance of your Manuscript/Research paper for publication in International journal on Mechanical & Automobile Engineering (IJMAE) ISSN:0974-231X. (Acceptance Code: SERC-IJMAE-JBBN11-03-21N).

[6]. Md. Abid Ali, Dr. K.N.S. Suman, Dr. V.V.S. Kesava Rao, “Study of Mechanical Properties of Wood Polyacrylonitrile Composites”, International journal of Engineering Science and Technology.

[7] Md. Abid Ali, Dr. K.N.S. Suman, Dr. V.V.S. Kesava Rao, “Thermal Analysis of Neem Wood Polyacrylonitrile Composites”, IJETSE International Journal of Emerging Technologies in Sciences and Engineering, Vol., No.(accepted).

[8] Dr MD. ABID ALI, “Mechanical Properties Of slag Reinforced Polymer Composites”  ,International Journal Of Mechanical And Production Engineering Research And Development.ISSN:2249-6890 IN AUG 2013.

[9]. Dr MD. ABID ALI, “Finite Element Analysis of Glass/Epoxy Composite Laminates with Different Types of Circular Cutouts”,Indian Journal Of Applied Research. Volume : 3 Issue : 6 June 2013 SSN – 2249-555X

[10]. Dr MD. ABID ALI, “ Thermal Characterization of Neem and Cork Wood Polyacrylonitrile Composites”Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering Volume 14 Issue 3 Version 1.0 Year 2014

[11]. Dr MD. ABID ALI, “Thermal Characterization of  Neem and Mango Wood Polyacrylonitrile Composites”TJER(Scopus)

Vocational Training        :              

                                CNC Turning/CNC Milling Training course using MTAB  & Denford Equipment at the MTAB – DENFORD Technology Centre Chennai, India from 15.04.2003 to 19.04.2003

 

 

Subject Taught-U.G:

Engineering Graphics, Engineering Mechanics, Metallurgy & Materials Science, Instrumentation & Control System, Production Technology – 1, Operations Research, Optimization Techniques, Management science, Managerial Economics and Financial Analysis, Metrology, CAD/CAM, Mechanical Handling Equipment’s, Introduction to Aeronautical Engineering, Aerospace Materials and  Composites, Computational Aerodynamics, Finite Element   Modeling and Methods, Power Plant Engineering, Mechanics of Solids, Machine Tools, Machine Drawing,  Design of machine members-II, Kinematics of Machines. Reverse Engineering &Rapid Prototyping, Robotics, Cellular Manufacturing Systems